Why are my drywall seams showing?

Sometimes, drywall seams become visible when a house has undergone considerable settling. Here’s yet another possible cause: When drywall sheets with uncut edges are butted together, a depression forms along the line where they join. That depression is meant to accommodate joint compound and drywall tape.Click to see full answer. Simply so, is it normal to see drywall seams?When a drywall seam is good, you can’t see it. When it’s poorly installed, its visibility makes the whole wall look bad. All these defects can be corrected with joint compound, or mud, and drywall tape, but cracks indicate the possibility of problems with the walls or foundation.One may also ask, does drywall have to end on stud? Keep in mind that all pieces of drywall should begin and end on a stud. You should never have a piece of drywall overhanging a stud, or two pieces of drywall meeting in the open spaces between studs. If your stud walls were properly constructed on 16″ centers, you should have very few problems with this. In this way, what causes drywall seams to bulge? Bulges due to improper installation are often caused by overdriving fasteners or not securing the drywall to the studs properly. However, larger bulges in your drywall often occur if moisture is behind the panels due to leaking pipes or roofs.How do you fix a drywall hump?To fix this problem, remove the offending screw and drive a new drywall screw into the wall roughly 1 1/2 inches away on each side of the old screw. Insert the screws so that the head sinks just slightly below the surface of the drywall, creating a dimple. If you break the paper on the drywall, you’ve gone too far.

ncG1vNJzZmivp6x7pLHLnpmroaSesrSu1LOxZ5ufonuotI6wn7JlkaeybrnYZpursaeWua150p6YpqtdqLWww8innmZqXw%3D%3D